100 Stainless Steel Narrow Stile Single Point Side Latch Rim Surface Mount Panic Exit Bar
$49.48
Quantity:




Bulk Discounts of 20% Off
LiveChat
  Click the LIVE CHAT button to speak
  to a live person now about this product.
Product Details

Postive Where to use this panic exit bar:

• Glass doors with a stile (metal frame) of at least 2" or 4" if using an outside handle.
• Steel, wood, and composite solid face doors
• Doors with a maximum with of 38.25"
• Doors with a maximum thickness of 3 3/8"
• Any door usage frequency
• Single doors, dual doors with mullions, Dual doors without mullions when paired with a 120 Series Panic Exit Bar

Negative Where not to use this panic exit bar:

• Not UL certified, don't use if UL certification is needed for inspection. Click here for UL rated bars
• Not fire rated, not to be used on a fire break. Click here for a fire rated bar
• Cannot release a magnetic door lock, if door is held locked by a magnetic lock do not use this panic bar.Click here for a micro switch panic bar

Features and Inclusions:

Rim type, simple surface mounting
• Includes steel strike for door frame
• Universal mounting and/or with 28" or 36" push bar length

2200-Door
Click To Enlarge



Product Video and Assembly Tips

Trimming the panic bar to size:

The actual bar that goes between the two handles is provided ready for sizing. To shorten the bar simply cut it with a hack saw or miter saw to the length needed. Drill a 3/16 hole in the bar for the set screw and attach to the handles.
 
 
This model is universal and can be used left or right handed.

Latching and mounting:

This panic bar is surface mount so the panic bar is placed on the rear face of the door. The strike goes on the door frame behind the door, not on the inside of the frame where you may have previously had a handle. On the door if you previously had a handle that will need to be removed. Caps are available for the hole left behind after the handle is removed. Door jamb brackets are also available to cover where the old handle latched to the frame. Mounting bolts are provided however depending on the material the door is made of you may switch to the same diameter in wood screws, self tapping metal screws, or for added strength - sex bolts (sex bolts have a female side on the outside of the door and a male side on the inside of the door and then they join in the middle of the door, Because both faces of the door are used for securing the bar it makes for a very strong hold.)

Optional products associated with this bar (purchased separately):

Outside door handle with key release. There are two different models of handle. The level handle and the knob handle which both work the same way. The handle will take the place of that cylinder lock. The handle interacts with the panic exit bar the same way as the cylinder lock that was provided with the panic bar did; as a momentary release. The handle is key-lockable so someone can no longer turn the handle unless they have a key. The key will not disengage the panic bar, only engage or disengage the handle, which then the handle disengages the panic bar. The key in the handle is a non-momentary key.

Surface Mounted Electric Strike. This is another method for releasing the door from outside or from a remote location. The electric strike replaces the provided mechanical strike. When the electric strike is not being triggered the panic bar engages it the same as it would a mechanical strike. However when you trigger the electric strike with an access device the door can then be pulled open from the outside. An access device can be a keypad, a card reader, an intercom, a desk push button, a receiver/remote control or even a GSM cell phone receiver. Keep in mind if you purchase the electric strike you will also require a pull handle for the outside of the door and access devices.

Door Closer. There are a couple of variations of door closers with a few different features however the main purpose is the same; to make sure the door stays closed. Because this door will always latch to the strike this is a popular addition to ensure the door stays closed and locked.

Pull handle / Finger Pull. The accessory to make the cylinder lock is sold separately. Click here to view the Sentry Safety Lever Handle. As you turn the key in the cylinder lock to release the panic exit bar you have to pull at the same time. These handles provide something to grab and pull on as you turn the key.


Manual: 100 series panic exit device
QB ID: DK-350