TB400 LockeyUSA Hydraulic Gate Closer (Can Handle 75 to 175 Lbs of Weight) - Black

$320.66 In Stock
Please Select an Option: 
Quantity:


Bulk Discounts of 20% Off
Product Details

Features:

  • Closes large and small gates up to 250 lbs. (depending on the model) easily and gently
  • Hydraulic/Nitrogen gas controlled closing speed
  • Installs on side, top, middle, or bottom of right or left hand gates
  • Mounts on opening side of gate, pushing the gate closed
  • Max. opening angle of 110 degrees (LockeyUSA recommends use of a mechanical stop to restrict opening angle)
  • Mounting brackets and fitting bar included
  • Finish Options: Black or Stainless Steel
  • The TB400 Gate Closer is an economic and reliable automatic gate closer for use on commercial or residential gates. Unlike normal closing springs, the TB Series does not slam gates shut; rather it firmly pushes the gate closed, making it ideal for use with Lockey® security locks and other latching devices. The closing speed is pre-set to provide a controlled close of approximately 6 seconds, depending on the weight of the gate and quality of the hinges.

    Technical Overview:

    Maximum Gate Weight: 75 - 175 lbs.
    Maximum Gate Width: 40 - 64 in.
    Maximum Opening Angle: 110 degrees
    Type of Gate Material: Vinyl, Wood, Steel
    Closing / Latch Method: Hydraulic / Nitrogen Gas
    Material: Steel / Stainless Steel
    Color: Black or Stainless Steel
    Hinge Arrangements or Offset: In-line or Offset
    Opening Pressure: Apprx. 6-12 lbs.

    Opening Force Chart:
    Added Opening Force
    Closer Pressure: 36" Gate 48" Gate 60" Gate Constant Closing
    No closer 3/4 lbs. 1/2 lbs. 1/4 lbs. 0
    TB200 6 lbs. 4 lbs. 3 lbs. 45 lbs.
    TB400 10 lbs. 8 lbs. 6 lbs. 90 lbs.
    TB600 13 lbs. 10 lbs. 8 lbs. 135 lbs.

    Added force at 45 degree OPEN
      36" Gate 48" Gate 60" Gate
    TB200 7 lbs. 5 lbs. 4.5 lbs.
    TB400 13 lbs. 9.5 lbs. 8 lbs.
    TB600 18.5 lbs. 13.5 lbs. 12 lbs.

    NOTE: All measurements are taken using the 1st mounting hole on the post bracket with a 3" distance between the center of the hinge and the center of the post mounting bracket.  The opening pressure will INCREASE using the 2nd, 3rd and 4th holes.  These are "ADDED" opening pressures.  This chart DOES NOT take into consideration the hinge arrangements, quality of hinges, ease of operation, wind, etc.


    Manual: tb200400600_instructions1
    QB ID: TB400


    Write A Review

    Reviews

    Average Customer Rating
    Overall

    Rating Snapshot
    Select a row below to filter reviews
    5
    25%
    4
    75%
    3
    0%
    2
    0%
    1
    0%
    Reviews (4)
    << < > >>
    privacy Guaranteed American Express Visa MasterCard Discover PayPal eCheck PayPal Credit
    verisign godaddy fedex Ups