Sentry Safety 100 Series Stainless Steel Cross Bar Panic Exit Device 28"/36"

$87.00
$67.49 In Stock
Quantity:


Bulk Discounts of 20% Off
sentry safety hardware exit bar promotion banner

Product Details

Works with Sentry Safety Handles ONLY

Take a look at our selection of Door Handles Here (Under Level Handle Lock)


Positive Where to use this panic exit bar:

• Glass doors with a stile (metal frame) of at least 2" or 4" if using an outside handle.
• Steel, wood, and composite solid face doors
• Doors with a maximum width of 38.25"
• Doors with a maximum thickness of 3 3/8"
• Any door usage frequency
• Single doors, dual doors with mullions, dual doors without mullions when paired with a 120 Series Panic Exit Bar

Negative Where not to use this panic exit bar:

• Not UL certified, don't use if UL certification is needed for inspection. Click here for UL rated bars
• Not fire rated, not to be used on a fire break. Click here for a fire rated bar
• Cannot release a magnetic door lock, if the door is held locked by a magnetic lock do not use this panic bar. Click here for a micro    switch panic bar

Features and Inclusions:

• Rim type, simple surface mounting
• Includes steel strike for the door frame
• Universal mounting and/or with 28" or 36" push bar length

120-Door
Click To Enlarge

Product Specifications
Brand Sentry Safety Hardware
Model 100 Series
Dimensions & weight Length: 28" or 36"; weight 5 lbs
Material Stainless Steel
Finish Grey
Hardware Product Type Rim type cross bar
Commercial or Residential Commercial
Function Panic exit
For Doors' Size Doors width up to 38.25"; Door thickness of 3 3/8"
For Door Type Steel, wood, and composite solid face doors
Handed left or right handed
Accessories Included Steel strike for the door frame


Product Video and Assembly Tips

Trimming the panic bar to size:

The actual bar that goes between the two handles is provided ready for sizing. To shorten the bar simply cut it with a hacksaw or miter saw to the length needed. Drill a 3/16 hole in the bar for the set screw and attach to the handles.
 
 
This model is universal and can be used left or right handed.

Latching and mounting:

This panic bar is surface mounted. The panic bar will be placed on the rear face of the door. The strike goes on the door frame behind the door, not on the inside of the frame where you may have previously had a handle. If the door has a handle that will need to be removed. Caps are available for the hole left behind after the handle is removed. Door jamb brackets are also available to cover where the old handle latched to the frame. Mounting bolts are provided however depending on the material of the door you may switch to the same diameter in wood screws, self-tapping metal screws, or for added strength - sex bolts. (Sex bolts have a female side on the outside of the door and a male side on the inside of the door and then they join in the middle of the door. Since both faces of the door are used for securing the bar it makes for a secure hold.)

Optional products associated with this bar (purchased separately):

Outside door handle with a key release. There are two different models of handle. The level handle and the knob handle which both work the same way. The handle will take the place of the cylinder lock. The handle interacts with the panic exit bar the same way as the cylinder lock that was provided with the panic bar. The handle is key-lockable so someone can no longer turn the handle unless they have a key. The key will not disengage the panic bar, only engage or disengage the handle, which then the handle disengages the panic bar. The key in the handle is a non-momentary key.

Surface Mounted Electric Strike. This is another method for releasing the door from outside or a remote location. The electric strike replaces the provided mechanical strike. When the electric strike is not being triggered the panic bar engages. However, when you trigger the electric strike with an access device the door can then be pulled open from the outside. An access device can be a keypad, a card reader, an intercom, a desk push button, a receiver/remote control or even a GSM cell phone receiver. Keep in mind if you purchase the electric strike you will also require a pull handle for the outside of the door and access devices.

Door Closer. There are a couple of variations of door closers with a few different features. However, the main purpose is the same; to make sure the door stays closed. Because this door will always latch to the strike this is a popular addition to ensure the door stays closed and locked.

Pull handle / Finger Pull. The accessory to make the cylinder lock is sold separately. Click here to view the Sentry Safety Lever Handle. As you turn the key in the cylinder lock to release the panic exit bar you have to pull at the same time. These handles provide something to grab and pull on as you turn the key.


Manual: 100 series panic exit device
QB ID: DK-350


Write A Review

Reviews

Average Customer Rating
Overall

Rating Snapshot
Select a row below to filter reviews
5
100%
4
0%
3
0%
2
0%
1
0%
Reviews (4)
<< < > >>
privacy Guaranteed American Express Visa MasterCard Discover PayPal eCheck PayPal Credit
verisign godaddy fedex Ups