Search by Category
Access control can be a critical function of security and safety for your property. On the surface many find the idea of installing magnetic locks,
electric door strikes and other such devices to be triggered by keypads,
card readers or intercoms to be an intimidating thing. However Panic Exit Pro has simplified the process by locating some of the most user friendly versions of these commercial door hardware products and pairing them with our instructions and technical assistance.
When locking a door shut and releasing it electronically there are two ways to go.
One method is with a magnetic lock on the door, a microswitch panic exit bar on the door and an access control point on the outside (i.e. keypad, card reader, etc.). In this case because all of the magnetic locks are fail safe it is best to have a battery backup supply for the system. In the event of a power failure without a battery back up the system would fail to an unlocked state. The advantage of using a magnetic lock is the reliability of locking (since there are no parts latching into one another, locking is almost certain) and the holding force available.
Another is to retain mechanical latching for the panic exit bar and simply move the latching point out of the way with an electric strike for electronic access. Most of our electric strikes are fail secure, which means when power is not applied the latch remains in place. In the event of a power failure the door would remain securely locked. Also with or without power the panic exit bar would still allow exiting.
Lastly you will find on this page exterior trim for the panic exit bars. Any of the panic exit bars that come with a cylinder release for external access can utilize exterior trim for outside access.
Parts And Accessories Panicexitpro
Has the ability to control two separate devices or two different relays on a control board
Can learn up to 400 codes
|
Features a range that most of the time exceeds 300 feet
Each button on this remote sends a unique code
|
Designed for use with MegaCode format receivers
Preset at the factory to one of over 1,000,000 codes
|
Used to activate linear products remotely
Designed for use with MegaCode format receivers
Provides unparalleled security
Pre-set at the factory to one of over 1,000,000 codes
|
Suitable for environments where you need to control more than one entry
Programmable access relay activation time, from one to 120 seconds
has two relays to open a device paired with keypads or remotes
|
Remote-FOB for LockeyUSA E-Digital Series Locks
Up to 5 remotes can be programmed with each lock
|
Ability to control multiple devices
Up to 15 minutes of time delay
Simple way to set time delay
|
|
Ability to control multiple devices
Easy to intall
Simple way to set time delay
|
|
Electromagnetic door holder
Holds the door in the open position and releases the door to close by switch or alarm
Choose from Steel or Aluminum material
Compatible with LockeyUSA M-Series keyless locks
Can be welded or bolted in
Perfect for double sided locks
|
Choose from Steel or Aluminum material
Compatible with LockeyUSA 2930, 2945, 2985 keyless locks
Can be welded or bolted in
Designed for narrow stile doors
|
Choose from Steel or Aluminum material
Compatible with LockeyUSA 1150 and 1600 keyless locks
For use with 2 3/8" backset only
|
Choose from Steel or Aluminum material
Most likely used for double sided locks
Compatible with LockeyUSA 2000 and 3000 keyless locks
For use with 2 3/8" backset only
|
Easy to install
Replaces door knob
Dimensions: 101/2"x 31/2"x 1/8"
Finish: Satin Chrome
|
Keeps keys secure
Removable front cover by entering combination
12 Push button
Finish Options Available
|
 |
Available in Black or Silver
|
|
Compatible with: LockeyUSA SUMO GL2 Gate Lock
Allows SUMO GL2 Gate Lock to mount on applications 3.5” to 5” thick
|
Includes: (2) tamper-proof security screws, security Torx bit
|
Available in Black or Silver
|
|
16-Guage Electro-Galvanized Steel
Available in Black or Silver
|
|